| Customization: | Available |
|---|---|
| After-sales Service: | Non-Artifical Damage,One Year Warranty |
| Warranty: | Non-Artifical Damage,One Year Warranty |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
TempU 03 Multi-use LCD Display Temp & RH Data Logger For Logistics Monitoring features a plug-and-play USB port interface. It allows for faster access to data collected in any cold chain management process. For carrying out the analysis, the TempU03 is connected directly to the USB port. The PDF and CSV reports are then automatically generated. This shows the temperature and humidity profile as well as all individual values plus statistical information. No hardware (such as cables or interfaces) or software required.
|
Product name:
|
TempU 03 Multi-use LCD Display Temp & RH Data Logger For Logistics Monitoring
|
|
Temperature unit:
|
ºC or ° F
|
|
Measuring Range:
|
Humidity 0%~100%RH, Temp -30 ºC~60 ºC
|
|
Accuracy:
|
±3%RH; ±0.5 ºC(-20 ºC~+40 ºC), ±1.0 ºC(other)
|
|
Resolution :
|
0.1%RH typically, 0.1 ºC
|
|
Memory Capacity:
|
32000 readings
|
|
Record Interval:
|
10 seconds to 18 hours adjustable [Default:10 mins]
|
|
Report Generation:
|
Simultaneously generate PDF report and CSV files
|
|
Communication Interface: |
USB2.0
|
|
Product Weight:
|
25g
|
|
Dimensions:
|
89mm*36mm*16mm
|
|
Battery:
|
Typically 1 Year; CR2032 3.0V Lithium Battery (Depending on Sampling Rate and Environment)
|
a. Start Recording
Press and hold the " " button for more than 3S until the " OK" light is on, and the " " or "WAIT" displays on the screen,indicating starting recording successfully.
b. Mark
When the device is in the recording status, press and hold the " " button for more than 3S, and the screen will switch to the "MARK" interface. The number of "MARK" will increase by one, indicating data was marked successfully.
(Note : One record interval only can mark one time ,the logger can mark 6 times in one recording trip. Under status of start delay, the mark operation is disabled. )
c. Stop Recording
Press and hold the " " button for more than 3S until the "ALARM" light is on, and the " "displays on the screen, indicating stopping recording successfully.
Note :If the logger is stopped during the status of start delay, there will be a PDF report but no data.
){kind=link}