Single Use Data Logger USB Temperature Data Logger Recorder High Accuracy Cover 15 days for Cold Chain
Single-use PDF Temperature Data Logger (TempU05) is one kind of cold chain data logger. It is mainly used for temperature recording during storage and transportation of foodstuff, medicine, chemicals and other products. After record finishing, it can be inserted to computer's USB port and get PDF report directly.
Specifications:
- Use Type: Single-use
- Log Interval: 10mins (60days)
- Accuracy: ±0.5ºC (-20ºC~+40ºC); ±1ºC(others)
- Data Storage Capacity: 10000 records
- Alarm Temperature: <2ºC or >8ºC (<35.6ºF or >46.4ºF)
- Start Delay: 30mins
- Operating Temperature: -30ºC~+60ºC (22ºF~140ºF)
- Storage: Recommend 20% to 60% RH, 10ºC to 50ºC
- Water Proof Level: IP67
- Dimension: 67mm*28mm*5.5mm
- Communication Interface: USB2.0
- Report Type: PDF
- Software: No need install any software
Operating Instruction:
- Press and hold the button more than 3s. Then the "OK" light will brighten for 3s, which indicates a successful starting, then you can put the data logger where you want to monitor and record.
- When logging, the "OK" LED will flash in green every 10s, if there are no alarm events happened. Or the "ALARM" LED will flash in red every 10s, if there happened alarm events.
- When the memory is full or press and hold the button for more than 3s, the "ALARM" light will brighten for 3s, which indicates a successful stopping.
- Tear or cut off the plastic bag and insert the logger into an available USB port on a PC. "OK" light and "ALARM" light will flash in turn when a PDF report is generating. When the PDF report has been generated, the "OK" light will brighten until pulling out from the USB port. (Note: If the logger is stopped during the status of start delay, there will be a PDF report but no data.)
Audited Supplier 
){kind=link}
){kind=link}